Zoom And Viewport - Planar m52L Installation Manual

Zoom and Viewport

Zoom and Viewport
Zoom fits the edges of a large picture - one that covers many displays' screens - from
side to side and top to bottom.
Note: Zoom and Viewport adjustments are mainly used for Planar's cube products with no
mullions or thin mullions.
To access the Zoom menus, press / twice on the remote to open the
SIZE POS ZOOM
& menu. Press / a third time to open the &
TOP LEFT SIZE POS ZOOM BOTTOM RIGHT
menu.
You may zoom the sides up to +100 pixels larger in each direction. You may also
zoom the sides up to –100 pixels smaller, but only if that side is not the edge of the
overall picture. An example may help make this point more clearly.
This is the original picture from the source.
Unit Y
Unit X
The picture is cropped and there is some extra picture to the right, off the screens. All
the displays can be zoomed out (+) to make the picture larger in each direction.
Unit X cannot be zoomed in (–) at the bottom or the left side, because there is no
more picture to pull onto the screen.
Unit Y cannot be zoomed in at the bottom, but it can be zoomed in from the right (–)
because there is more picture out there. Of course, the center display - Column 2,
Row 2 - can be zoomed in any direction.
m52L Installation Guide 55