Table of Contents
Advertisement
Justify Settings
Justify determines how the picture will be placed in a wall of displays. For a single
display, Justify determines placement on the screen. For a wall of displays, if the
image is not large enough to fill all the displays in the wall, some will be left blank.
Top/Left
Positions the image starting with the top, leftmost display, then across and down.
Center
Positions the image starting with the center of the image in the center of the wall
spreading out equally to all displays.
Bottom/Right
Positions the image starting with the bottom, rightmost display, then across and up.
Overscan
This is used to hide blank areas and stray lines in the edges of an image. The lower
the overscan setting, the more of the optical image that is seen. Planar displays have
a default overscan of 3% for S-Video and composite video images. Standard CRT
televisions have an overscan of about 5%, which may actually hide content or images
that you want to see.
Border Color
This determines the color of the "extra" space around the picture if it doesn't fill the
screen. The choices are: black, red, white, red, green, blue, dark red, dark green and
dark blue.
Note:
because there will be no border.
Wall Width and Wall Height
See "Wall Width and Wall Height" on page 51.
Unit Column and Unit Row
See "Unit Column and Unit Row" on page 52.
Wall Mode
See "Wall Mode" on page 52.
When the
SCALE MODE
m52L Installation Guide
is
, the
FILL ALL
BORDER COLOR
Justify Settings
line will be grayed out,
45
Advertisement
Table of Contents
