Installing The Video Input Module (Vim) - Planar m70l Installation Manual

Installing the Video Input Module (VIM)

If you receive the optional Video Input Module (VIM) separately, use the following
instructions to install it.
Your VIM shipment should include the following items:
1
2
WARNING!
electronic part.
3
4
WARNING!
nents in the VIM board.
5
• VIM board
• New VIM cover
• Mounting screws
• Washers/nuts
• Ground strap
Attach the ground strap to your wrist and the chassis.
Turn off the AC power and unplug all cables.
Always turn off power and remove the power cord when adding or removing an
Remove the screws that secure the old VIM cover. Place the screws aside.
Remove the old VIM cover.
Failure to properly use a grounding strap can destroy sensitive electronic compo-
Remove the VIM board from its shipping pouch and anti-static bag.
m70L Installation & Configuration Guide
Installing the Video Input Module (VIM)
Power switch
Power cord
13