This chapter acquaints you with the front and rear panels, shows you how to make the connections,
3.1 Safety Warnings
The length of exposed (bare) power wire should not exceed 7mm.
Do not use this product near water, for example, in a wet basement.
Only a qualified technician should service or disassemble this device.
3.2 Front Panel
The following figure shows the front panel of the GS-3012. The front panel contains the switch LEDs, RJ-45
gigabit ports, mini GBIC ports and a console and management port for local management.
LEDs
The following figure shows the front panel of the GS-3012F. The front panel contains the switch LEDs, mini GBIC
ports, RJ-45 Gigabit ports, and a console and management port for local management.
LEDs
Hardware Connections
Figure 3-1 GS-3012 Front Panel
Mini GBIC Ports
Figure 3-2 GS-3012F Front Panel
Hardware Connections
install/remove (optional) modules and explains the LEDs.
Ethernet Ports
Mini GBIC/ Ethernet Combo Ports
GS-3012/GS-3012F User's Guide
Chapter 3
Mini GBIC Ports
Console Port
Console Port
Management Port
Management Port
3-1