Table 4-3 Navigation Panel Sub-Link Descriptions - ZyXEL Communications GS-3012 User Manual

GS-3012/GS-3012F User's Guide
BASIC SETTING
The following table summarizes these sub-links in the navigation panel.
LABEL
Basic Setting Screens
System Info
General Setup
Switch Setup
IP Setup
Port Setup
Advanced Application
VLAN
Static MAC
Forwarding
Filtering
Spanning Tree
Protocol
Bandwidth Control
Broadcast Storm
Control
4-4
Table 4-2 Web Configurator Screen Sub-links Details
ADVANCED APPLICATION
Port Authentication
RADIUS
Port Security
Queuing Method
Classifier
Policy Rule
Multicast
Multicast Status
Multicast Setting
IGMP Filtering Profile

Table 4-3 Navigation Panel Sub-link Descriptions

This link takes you to a screen that displays general system and hardware monitoring
information.
This link takes you to a screen where you can configure general identification information
about the switch.
This link takes you to a screen where you can set up global switch parameters such as
VLAN type, MAC address learning, IGMP snooping, GARP and priority queues.
This link takes you to a screen where you can configure the IP address, subnet mask
(necessary for switch management) and DNS (domain name server).
This link takes you to screens where you can configure settings for individual switch ports.
This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu).
This link takes you to screens where you can configure static MAC addresses for a port.
These static MAC addresses do not age out.
This link takes you to a screen to set up filtering rules.
This link takes you to screens where you can configure the STP to prevent network loops.
This link takes you to screens where you can define a maximum allowable bandwidth for
incoming and/or out-going traffic flows on a port.
This link takes you to a screen to set up broadcast filters.
IP APPLICATION
802.1x
MVR
DESCRIPTION
MANAGEMENT
Cluster Management
MAC Table
ARP Table
Introducing the Web Configurator
Status
Configuration