Figure 7-5 802.1Q Static Vlan; Table 7-4 802.1Q Static Vlan - ZyXEL Communications GS-3012 User Manual

The following table describes the labels in this screen.
LABEL
Active Select this check box to enable the VLAN.
Name Enter a descriptive name for this VLAN group for identification purposes.
VLAN Group ID Enter the VLAN ID for this static VLAN entry; the valid range is between 1 and 4094.
Port The port number identifies the port you are configuring.
Control Select Normal for the port to dynamically join this VLAN group using GVRP. This is the default
selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Tagging Select TX Tagging if you want the port to tag all outgoing frames transmitted with this VLAN
Group ID.
Add Click Add to save the new rule to the switch. It then displays in the summary table at the bottom
of the screen.
VLAN

Figure 7-5 802.1Q Static VLAN

Table 7-4 802.1Q Static VLAN

DESCRIPTION
GS-3012/GS-3012F User's Guide
7-7