Figure 2-2 Attaching Mounting Brackets And Screws - ZyXEL Communications GS-3012 User Manual

GS-3012/GS-3012F User's Guide
2.1.2 Rack-Mounted Installation
The switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other equipment.
Follow the steps below to mount your switch on a standard EIA rack using a rack-mounting kit.
Align one bracket with the holes on one side of the switch and secure it with the bracket screws smaller
1.
than the rack-mounting screws.
Attach the other bracket in a similar fashion.
2.
After attaching both mounting brackets, position the switch in the rack by lining up the holes in the
3.
brackets with the appropriate holes on the rack. Secure the switch to the rack with the rack-mounting
screws.
2-2

Figure 2-2 Attaching Mounting Brackets and Screws

Hardware Installation