Chapter 22 Dhcp Relay; Dhcp Relay Overview; Dhcp Relay Configuration - ZyXEL Communications GS-3012 User Manual

This chapter describes the DHCP relay and shows you how to configure the DHCP Relay screen.

22.1 DHCP Relay Overview

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a DHCP server. You can configure the switch to relay client DHCP requests
to a DHCP server and the server's responses back to the clients.
22.1.1 DHCP "Relay Agent Information Option"
The switch can add information to client DHCP requests that it relays to a DHCP server. This helps provide
authentication about the source of the requests. You can also specify additional information for the switch to add to
the client DHCP requests that it relays to the DHCP server. Please refer to RFC 3046 for more details.
22.1.2 DHCP Relay Agent Circuit ID Sub-option Format
The DHCP relay agent information feature adds an Agent Information field to the option 82 field of the DHCP
headers of client DHCP request frames that the switch relays to a DHCP server. The Agent Information field that
the switch adds contains an "Agent Circuit-ID sub-option" that includes the following information about where the
DHCP request was received.
Slot ID (1 byte, this is 0 with this model)
Port ID (1 byte)
VLAN ID (2 bytes)
System name (up to 32 bytes, this is optional)

22.2 DHCP Relay Configuration

To configure DHCP relay information and specify the DHCP server(s), click IP Application and DHCP Relay to
display the screen as shown next.
DHCP Relay
GS-3012/GS-3012F User's Guide
Chapter 22
DHCP Relay
22-1