Table 30-5 Command Summary: Interface - ZyXEL Communications GS-3012 User Manual

normal <port-list>
untagged <port-
list>
30.9.5 interface Commands
The following commands are listed in configuration mode as "interface" switch commands; all are preceded with
the command
interface.
interface
port-
channel
<port-
list>
bandwidth-limit
broadcast-limit
Introducing the Commands
Table 30-4 Command Summary: config-vlan Commands
COMMAND

Table 30-5 Command Summary: Interface

COMMAND
cir <Kbps>
egress <Kbps>
ingress <Kbps>
pir <Kbps>
<pkt/s>
ip address
inband-default
dhcp-bootp
untagged <port-
list>
GS-3012/GS-3012F User's Guide
DESCRIPTION
Sets the default in-band interface to use
a static IP address in this VLAN.
The switch will use the default IP
address of 0.0.0.0 if you do not
configure a static IP address.
Specifies the port(s) you want to tag all
outgoing frames transmitted with this
VLAN Group ID.
Specifies the port(s) to dynamically join
this VLAN group using GVRP
Specifies the port(s) you don't want to
tag all outgoing frames transmitted with
this VLAN Group ID.
DESCRIPTION
Enables a port or a list of ports
for configuration.
Enables bandwidth limit on the
switch.
Sets the guaranteed bandwidth
allowed for incoming traffic on
the port(s).
Sets the maximum bandwidth
allowed for outgoing traffic on the
port(s).
Sets the maximum bandwidth
allowed for incoming traffic on
the port(s).
Sets the maximum bandwidth
allowed for incoming traffic on
the port(s).
Enables broadcast storm control
limit on the switch.
Sets how many broadcast
packets the interface receives
per second.
30-23