Seagull Models Savage Cruiser Assembly Manual page 18

SAVAGE CRUISER
3) Use drill bit in a pin vise to drill the
mouting holes in the blocks.
4) Apply 2-3 drops of thin C/A to each of
the mounting holes. Allow the C/A to cure
without using accelerator.
5) Use dental floss to secure the connec-
tion so they cannot become unplugged.
6) Secure the servo to the aileron hatch
using Phillips screwdriver and the screws
provided with the servo.
18 18
of the mounting tabs. Allow the C/A to cure
without using accelerator.
to pull the aileron lead through to the wing
root. Remove the string from the wing at the
servo location and use the tape to attach it
to then servo extension lead. Pull the lead
through the wing and remove the string.
C/A glue.
Instruction Manual.
7) Apply 1-2 drops of thin C/A to each
C/A glue.
8) A string has been provided in the wing