Online/Offline Status Procedure; Form Feed Procedure; Sample Print-Test Output - Honeywell PRU7070 Handbook

Table of Contents

Advertisement

!-"SZ&"()*+,-./0123456789:;{~>?@A8CDEFGHIJKLMNOPGRSTUVWXYZ
\JA 'abcdefgniJklmnop
-"SZ&'()*+,-./0123456789:;<=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[ ]A
~abcdEfg~ijklrnnopq
"SZ&"()*+,-./0123456789:;<=}?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\ A
~abcdefghljklmnopqr
$Z&'()*+,-./0123456789:;<=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]
T
a bcdefgfiijklmnopqrs
Z&'()*+,-./0123456789:;<=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]A TabcdefgfiiJklmnopqrst
&'()*+,-./0123456789:;(=}?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]A
~abcdefgRijklmnopqrstu
, ( ) *+. -. /0·123456789: ;
<
= }?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\J" ""<"abcdefgn i jk 1 mnopqr st
'.J.V
()*+,-./0123456789:;<=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]A
~abcdefgRijklmnopqrstuvw
)*+.-./0123456789:;<=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]A ""<"abcdefghiJklmnopqrstuvwx
*+,-./0123456789:;(=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]A
~abcdefghi)klmnopqrstuvwx~
+,-./0123456789:;<=>?@ABCDEFGHIJKlMNOPGRSTUVWXYZ[\]A
TabcdEfgRiJKlmnopqrstuvwx~Z
,-./0123456789:;(=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]'·
~abcdefghijklmnopqrstuv~x~Z(
-./0123456789:;{=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]A
TabcdefgRijklmnopqrstuvwx~Z(:
./0123456789:;C=}?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]A
~abcd€fgfiijklmnopqrstuvwx~Z(:)
/0123456789:;(=)?@ABCDEFGHIJKLMNOPGRSTUVWXYZ[\]A
TabcdefgRijklmnopqrstuvwx~Z(:}~
0123456789:;<=)?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]A_~abcdefgRijklmnopqrstuvwx~Z{: )~O
Figure
3-2.
Sample Print-Test Output
4. When the 16th line is being printed, press and hold the ON LINE/OFF LINE
switch. This will stop the Print-Test when the printhead reaches either end
of the line.
5. Press the ON LINE/OFF LINE switch. The printer will enter the online state
and the ON LINE indicator should light. When the ON LINE indicator lights,
the printer is ready for use.
Online/Offline Status Procedure
1. To change the online/offiine status of the printer, press the ON LINE/OFF LINE
switch located on the Operation Panel.
2. When the switch is pressed while the printer is online, the printer will go offiine
and the host system will be notified.
3. When the switch is pressed while the printer is offiine, the printer will go online
and the host system will be notified.
4. Check the Operation Panel to see if the ON LINE indicator is lit. If the ON LINE
indicator is not lit, the printer is offline. If the ONLINE indicator is lit, the printer
is online. The printer must be online to receive data from the controller. The
printer must be offiine to load paper, perform a local FORM FEED, or perform
a Print-Test.
FORM FEED Procedure
Operation
1.
Check to see that the paper has been loaded and aligned properly and that the
ONLINE indicator is not blinking. If the ON LINE indicator is blinking, check
to see if paper is feeding into the printer.
2.
Check to see that the printer is in the offiine state (the ON LINE light will be
out). If the ON LINE light is lit, press the ON LINE/OFF LINE switch to get
the printer offiine. The ON LINE indicator will go out.
3-3
CY93-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pru7071Pru7075Pru7076

Table of Contents