Status Leds And Indicators - Honeywell CN51 User Manual

Status LEDs and Indicators

Power LEDs
Battery LED Status
Red (solid)
The battery has less than
5% power.
Orange (solid)
The battery has less than
25% power.
Green (solid)
The battery is near or at full
capacity
Red to orange flash – fast
Orange flash – slow
Orange flash – fast
Orange, red, or green
flash – fast
Audio Indicators
Beeps
1
2
3
1 short
2 short
PrintPAD Series CN70/70e & CN51 User Guide
Power LED
Battery Status LED
Printer LEDs: Use this illustration to reference the location of the printer LEDs.
Description
•
If AC power is not plugged in, the printer will soon turn
off.
•
If the AC power is plugged in, the LED flashes and
charging is in progress.
•
If AC power is not plugged in, the battery charge is low.
•
If AC power is plugged in, the LED flashes and
charging is in progress.
•
If AC power is not plugged in, the battery is well
charged.
•
If AC power is plugged in, the LED is solid and
charging is complete.
•
Battery voltage is too high.
•
Charge has timed out.
•
Internal code error.
•
When AC power is plugged into the printer's power
port, the battery status LED flashes orange, red, or
green (depending on the battery status) to indicate the
AC adapter is plugged in.
Description
Printer wakes up.
Out of paper.
Low battery.
RF power is on (when blue, RF power button is pressed
and power was turned off).
RF power is off (when blue, RF power button is pressed
and power was turned on).
Chapter 2 — Printer Basics
Radio LED
Action
•
Charge the battery.
•
None. Wait for the charge
LED to turn green.
•
Charge the battery.
•
None. Wait for the charge
LED to turn green.
•
None.
•
Replace battery.
•
Restart battery charge
(battery may be bad).
•
Remove the battery, then
reconnect AC power.
•
None.
Action
None.
Install paper.
Charge battery.
None.
None.
5