Led Status Light - Honeywell PC42d User Instructions

Chapter 1: About the Printer
Using Printer Button (continued)
Printer Button Operation
Press and release the printer button If the printer is in 'idle' mode, it will begin to feed
Press the printer button for 3
seconds

LED Status Light

The LED status light can be in green, orange or red, with each indicating the printer's
current status. Use the Table below to view the corresponding status of the LED light's
color.
LED Status Light
LED Status
Off
Steady green color
Green flickering light after activation There is an error in the printer's RAM and
4
Description
paper until it reaches the initial position of the
next label.
If printing is in progress, it will be suspended.
If printing has been suspended, it will restart.
If printing has been suspended, the printing job
will be terminated, and all printing jobs will be
discarded. The printer will return to 'idle' status.
Description
The printer is not connected to power.
The printer is in 'idle' mode and awaits the next
printing job.
firmware upgrade is required. See
Upgrade"
on Page 22 for more information.
User Instructions for PC42d Desktop Printer
LED Status Light
"Firmware