Honeywell PRU7070 Handbook page 19

I
Operation
b. If the printer continues to operate improperly, call your Customer Services
Representative.
7. The printer is not communicating at all.
This probably means: The bluejumper on the TOP set of gold pins is covering
the wrong gold pins.
You should:
a. Reposition the bluejumper according to the requirements given in
AppendixB.
b. If the printer continues to operate improperly, call your Customer Services
Representative.
8. Paper is not advancing.
This probably means: There is an internal paper jam, or you have a printer
failure.
You should:
a. Check the paper chute (Figure 3-3) on the back of the printer to see if paper
coming out of the top of the printer is resting on the top of the paper enter-
ing the paper chute.
b. Ifpaper from the top of the printer is also entering the paper chute, remove
it by pulling out all paper in the chute.
c. Open the printer cover and remove any excess paper causing the paper jam.
d. Reload new paper.
e. If an internal paper jam is not the problem, you may have a more serious
problem and should call your Customer Services Representative.
o.
111111111111111111
Figure3-3. PaperChute
3-6
CY93-01