Set Channels In Use - COP Security inspire black 960h User Manual

Set channels in use

This option allows the DVR to be set so that some channels are completely disabled.
If channel(s) are disabled then all access to them in setup menus will be removed and
the channel(s)will not record or monitor video loss.
This effectively allows a 16 channel DVR to be converted in to a 14 channel DVR and will
save programming time and HDD space.
The channels can be switched back on at any time, but the DVR will require a restart
after this setting is changed.
Front panel
Use Up and Down arrow keys to navigate to
the option to change
Use Left and Right arrow keys to change
option
IR Remote
Use Up and Down arrow keys to navigate to
the option to change
Use Left and Right arrow keys to change
option
Engineer Manual
Inspire Black 960H DVR Range
80
Mouse
Highlight option to change using mouse
pointer
Click Side arrow buttons to change option
Remote keyboard
Use Up and Down arrow keys to navigate to
the option to change
Use Left and Right arrow keys to change
option