Basic Default Settings - COP Security inspire black 960h User Manual

Basic default settings

The following is only the basic settings that the DVR will use when set to factory default or
first powered up. There are many other settings and options but for most applications the
basic settings will allow the DVR to operate in a normal way.
The DVR will always start recording on power up unless the default settings are changed
by the engineer.
Item
Language
VGA resolution
HDD overwrite
Engineer user name
Engineer password
PTZ settings
Normal record quality
Normal record resolution
Normal record frame rate
Event record quality
Event record resolution
Event record frame rate
Record type
Record schedule
Pre and post event recording
Video loss recording
IP Address
Sub mask
Gateway
Port
Command port
Video port
Mobile port
Email settings
Alarm input type
Motion detect
Alarm input action
HDD error
Video loss alarm
Engineer Manual
Inspire Black 960H DVR Range
43
Default Setting
English
1024 x 768 @ 60Hz
On
Admin
888888
All off
High
2 CIF
12.5 fps
High
2 CIF
12.5 fps
Video and Audio
Continuous
Off
Off
192.168.0.10
255.255.255.0
192.168.0.1
80
5050
6050
7050
Not set
Normally open
Not set
Not set
Buzzer only
Buzzer only