Power Up; Power Down - COP Security inspire black 960h User Manual

Power up

To power the DVR up simply connect the external PSU, the DVR will then automatically
power up.
Once the DVR is powered up, the following conditions will be set:
• The DVR will automatically start recording on all available channels, unless
a channel is set to not record (disabled) or the schedule is set to limit
recording to Motion Detect, Alarm Event or a Timed Schedule
• The video loss alarm will not sound for any channels not used when the
DVR is powered up. The video loss alarm will only become active once a
channel has a video signal connected
• The time and date the DVR was powered up will be recorded in the log
• The DVR will be locked and will require a password to be entered before
any user functions become available

Power down

To power the DVR down it is recommended that the power button be used. If the power
is simply removed by unplugging the external PSU this can result in loss of some recordings
and the power down not being logged.
To power down simply press the power button on the front of the DVR. This will require
a password with the correct access level. This prevents unauthorised use of the power
button.
The default engineer password is 888888
The DVR will now power down in an orderly way, it will ensure that the latest video is
securely recorded and that the power down time and date is logged together with the
user name who initiated the power down.
OSD monitor
As shipped, the VGA monitor is set to show the on screen display. To switch the on screen
display between the VGA and BNC monitor press Back > 1 > Back.
Engineer Manual
Inspire Black 960H DVR Range
40