Network Basic Setup - COP Security inspire black 960h User Manual

Network basic setup

The following is only the basic settings that the DVR will use when set to connect direct to
PC / Laptop.
Requirements
PC / Laptop
Crossover network cable
Connecting
For direct cable connection to PC / Laptop a crossover must be used.
1 2 3 4
POWER
6 7 8 9
DVR settings
The default network settings will be sufficient, but if you want to change the settings see
page 95.
Computer settings
Depending on your version of windows and your PC / Laptop configuration it may be
necessary to change the network settings.
Set the PC IP address to 192.168.0.1
Set the PC sub mask to 255.255.255
Engineer Manual
Inspire Black 960H DVR Range
5 PTZ MENU
COPY
NETWORK
0 INFO MUTE BACK
DISPLAY
EVENT
HDD
44