Adjusting The Height Of The Stand - Sony LMD-2451W Operating Instructions Manual

Adjusting the Height of
the Stand
LMD-2451W and LMD-2051W come equipped with a
stand. LMD-1751W can be mounted on the optional
SU-561 Monitor Stand.
You can adjust the height of the monitor in three levels
for the LMD-2451W and four levels for the LMD-
2051W and LMD-1751W by changing the position of
the stand attachment bracket and the arm attachment
position. Depending on the height, you can install the
input adaptor with the stand attached to the monitor.
A and B in the following list indicate the screw holes
shown in the illustrations in steps 2 and 4.
Height of the monitor
Position of the A
stand attachment
bracket
Arm attachment B
position
3)
LMD-2451W – 430.5
(17)
LMD-2051W 376.7 403.0
7
(14 / ) (15
8
LMD-1751W 359.4 385.7
1
(14 / ) (15
4
1)
You can install the input adaptor with the stand attached to the
monitor.
2)
Default setting
3)
You cannot attach the stand in combinations of these positions.
For details on mounting the LMD-1751W on SU-561,
refer to the Mounting Instructions of SU-561.
1
Remove the stand attachment bracket (see
page 58).
2
Attach the stand attachment bracket to the A or B
screw holes.
The bracket is attached to the B holes at the factory
(LMD-2451W and LMD-2051W).
Unit: mm (inches)
A B B
A B A
1) 1), 2)
471.6 497.9
5 5
(18 / ) (19 / )
8 8
1), 2) 1)
444.1 470.4
7 1 5
/ ) (17 / ) (18 / )
8 2 8
1) 1)
423.8 450.1
1 3 3
/ ) (16 / ) (17 / )
4 4 4
A A
B
A
– +
B
A: Screw holes for low position
B: Screw holes for high position
3
Attach the stand attachment bracket with four
screws.
Use the screws removed in step 5 of "To remove the
stand attachment bracket".
4
Attach the arm.
Hang the hook of the bracket for using
the A screw holes.
A A A A
B B B B
– +
A A
B B
5
Secure the arm with four screws.
Use the screws removed in step 3 of "To remove the
stand attachment bracket".
6
Attach the arm cover.
To align the lower part of the LMD-2451W and
LMD-2051W display
Use the A screw holes for the LMD-2451W and the B
screw holes for the LMD-2051W display when you
attach the arm in step 4 above.
A A
B
A
B
A A
B B
Hang the hook of
the bracket for
using the B screw
holes.

Adjusting the Height of the Stand

57