Monitor stand with tilt function
LMD-2451W and LMD-2051W come equipped with a
monitor stand with tilt function. LMD-1751W can be
mounted on the optional SU-561 Monitor Stand.
You can select the height of the monitor by adjusting the
height.
For more information, refer to “Adjusting the Height of
the Stand” on page 57.
Rack mount
LMD-2451W and LMD-2051W support the VESA (100
× 100) standard, while LMD-1751W supports the
VESA (both 75 × 75 and 100 × 100) standard. The
LMD-2051W and LMD-1751W may be mounted on an
EIA-standard 19-inch rack (using an optional mounting
bracket).
Two-display
Two kinds of input signals are put on the monitor.
For more information, refer to MULTI DISPLAY of
“MULTI DISPLAY SETTING” on page 70.
Input signal waveform and audio level display
The waveform of the input signal or the audio level
(embedded audio only) is displayed as the sub display.
For more information, refer to SUB INPUT SELECT
and waveform of “MULTI DISPLAY SETTING” on
page 70.
Closed caption
The closed caption conforming to the EIA608 standard
is displayed.
The EIA/CEA-608 and EIA/CEA-708 standard closed
caption signals superimposed on an SDI signal are
displayed by installing the optional input adaptor.
Auto chroma/phase function
The chroma and phase of the decoder are automatically
adjusted with the auto chroma/phase function.
Blue only mode
In the blue only mode, a monochrome display is
obtained with all three of the R/G/B picture elements
driven with a blue signal. This mode is convenient for
chroma and phase adjustments and monitoring of VCR
noise.
H/V delay mode
The horizontal and vertical sync signals can be
monitored simultaneously.
Select marker/scan display
Various items for broadcast use can be displayed. The
center marker, safe area marker, aspect marker or
display size (scan), etc are displayed by selecting
according to use.