Option Setting - Sony LMD-2451W Operating Instructions Manual

Submenu
INPUT SELECT
OPTION AUDIO
SETTING

OPTION SETTING

* This setting is displayed only when a BKM-250TG is installed.
USER CONFIG – OPTION SETTING
A L M D I S P L AY:
P O S I T I O N :
T R A N S PA R E N C Y:
T / C D I S P L AY:
F O R M AT :
P O S I T I O N :
74
Adjustment Using the Menus
Setting
Selects the input audio signal.
• ALL: The sound except from
BKM-220D/243HS/244CC/
250TG is output.
• COMPOSITE: When the
COMPOSITE button is pressed,
the sound is output.
• Y/C: When the Y/C button is
pressed, the sound is output.
• RGB: When the RGB button is
pressed, the sound is output.
• COMPONENT: When the
COMPONENT button is
pressed, the sound is output.
• HD15: When the HD15 button
is pressed, the sound is output.
• DVI: When the DVI button is
pressed, the sound is output.
When BKM-220D/243HS/244CC/
250TG is installed, set the audio
channel for each adaptor.
CH1, CH2, CH1+CH2, CH3, CH4,
CH3+CH4, CH5, CH6, CH5+CH6,
CH7, CH8, CH7+CH8, CH9,
CH10, CH9+CH10, CH11, CH12,
CH11+CH12, CH13, CH14,
CH13+CH14, CH15, CH16,
CH15+CH16, OFF
You can display the L/R audio
levels of the selected channels on
the display when the multi display
is enabled.
xx
x
x
xx
x
x
Submenu Setting
ALM DISPLAY Selects ON to display the ALM (audio
level meter) display and OFF not to
display.
The indications of the audio level signify
as illustrated below, although the units
and values of the scale do not appear on
the display.
Note
For LMD-1751W, the ALM display is
not displayed when 1080i or 1080P
signal is input and NATIVE is selected
in the SCAN setting.
Audio level
1 2 3 4
Channel number
(Displayed in eight channels, including the channel
which is selected.)
POSITION Sets the position of the ALM display.
You can select between 1 and 2.
• 1: Top
• 2: Bottom
TRANSPARENCY Selects from 1 and 2 for the background
of the ALM display.
• 1: The background is black.
Displayed image is hidden behind the
background.
• 2: The background is transparent.
Displayed image can be seen
indistinctly behind the ALM display.
T/C DISPLAY Selects ON to display the time code
display and OFF not to display.
Note
For LMD-1751W, the time code display
is not displayed when 1080i or 1080P
signal is input and NATIVE is selected
in the SCAN setting.
FORMAT Sets the time code format.
• VITC: To display the time code in
VITC format.
• LTC: To display the time code in
LTC format.
Audio level
(dB)
OVER
0
-10
-20
-30
-60
5 6 7 8