Installing To The Rack (Lmd-2051W/1751W) (Using Mb-529/530) - Sony LMD-2451W Operating Instructions Manual

Inputs DVI Rev.1.0 applicable digital RGB signal.
To view the signals of the SXGA and higher resolution
when the DVI input is selected, use the cable within 3 m
1
(118 inches) in length.
/8
r HD15 input connector (D-sub 15 pin, female)
Inputs an analog RGB video signal (0.7 Vp-p, positive
polarity) and sync signal.
The Plug & Play function corresponds to DDC2B.
56

Installing to the Rack (LMD-2051W/1751W) (using MB-529/530)

Installing to the Rack
(LMD-2051W/1751W)
(using MB-529/530)
You can attach the monitor to the rack by using the
optional mounting bracket.
Monitor Mounting bracket
LMD-2051W MB-529
LMD-1751W MB-530
Preparation (For LMD-2051W only)
Remove the stand attachment bracket (see page 58).
1
Attach the mounting bracket.
For details on attaching the mounting bracket,
refer to the mounting instructions of the mounting
bracket.
2
Attach the unit to the rack with four screws.
Note
The screws are not supplied. Prepare screws according
to the rack.
COM POSI
TE
Y/C
RGB
COM PON
ENT
A-1
A-2
B-1
B-2
HD15
DVI
F1
F2
F3
F4
CON TRO L
+
VOLU ME
–
+
CON TRAS
T
–
+
PHAS E
–
+
CHRO
MA
–
+
BRIG HT
–
MEN U
+
–
ENTE R
RETU RN