On Mounting On A Rack; On Fan Error (For Lmd-2451W/1751W); Features - Sony LMD-2451W Operating Instructions Manual

On Mounting on a Rack

Leave 1U space empty above and below the monitor to
ensure adequate air circulation or install a fan to
maintain the monitor's performance.
If you have any questions about this unit, contact an
authorized Sony dealer.
On Fan Error (For LMD-2451W/
1751W)
The fan for cooling the unit is built in. When the fan
stops and the RETURN button on the front panel blinks
for fan error indication, turn off the power and contact an
authorized Sony dealer.
About this manual
The instructions in this manual are for the following
three models:
• LMD-2451W
• LMD-2051W
• LMD-1751W
The illustration of LMD-2451W is used for the
explanations.
Any differences in specifications are clearly indicated
in the text.

Features

The LMD-2451W (24-type), LMD-2051W (20-type) or
LMD-1751W (17-type) is a multiple format LCD
monitor for broadcast or business use featuring a precise
image and high performance. It supports both digital or
analog main broadcast signal and PC input. It is also
equipped with functions to adjust for various objects or
use.
High brightness LCD panel
Because of precise image, wide viewing angle
technology and high speed response, real color image
can be reproduced.
Multi-format
The monitor supports the video, Y/C, RGB, component,
SDI (3G/HD/SD, when the optional input adaptor is
used.) signals and NTSC/PAL color systems.
SDI supports not only HD-SDI and SD-SDI, but also
3G-SDI, which transmits twice as much data as HD-SDI
with a Single-link.
HD15 (analog) and DVI-D (digital) connectors are
equipped for the PC input.
For more information, refer to "Available signal
formats" on page 80.
Expandable input capability
The input connector configuration can be easily
modified by installing the optional input adaptor into the
optional input slot on the bottom of the monitor. Up to
two adaptors can be installed.
For more information, refer to "Available signal
formats" on page 80.
External remote function
The input signal is selected or various items are adjusted
by use of the serial (Ethernet) remote function. Up to 32
monitors and control units (max. 4) can be connected by
the Ethernet (10BASE-T/100BASE-TX) connection
and controlled remotely on the network. You can
control individual monitors or monitor groups simply by
entering the monitor ID or group ID number. You can
also execute the same operation on all connected
monitors, or put all connected monitors into the same
setup and adjustment state.
For more information, refer to SERIAL REMOTE of
REMOTE menu on page 75.
Refer to the Operation Manual of the BKM-15R Monitor
Control Unit.
49
Features