Sony LMD-2451W Operating Instructions Manual page 78

HD15 input connector
D-sub 15-pin (1)
R/G/B: 0.7 Vp-p, sync positive (Sync
On Green, 0.3 Vp-p sync negative)
Sync: TTL level (polarity free, H/V
separate sync)
Plug & Play function: corresponds to
DDC2B
DVI input connector
DVI-D (1)
TMDS single link
Remote input connector
Parallel remote
Modular connector 8-pin (1)
Serial remote
D-sub 9-pin (RS-232C) (1)
RJ-45 modular connector
(ETHERNET) (1)
Optional input slot
2 slots
Signal format:
H: 15 kHz to 45 kHz
V: 48 Hz to 60 Hz
DC IN connector
LMD-2451W/2051W: DC 24 V
(output impedance 0.05 ohms or
less)
LMD-1751W: DC 12 V (output
impedance 0.05 ohms or less)
Output
Composite output connector
BNC type (1)
Loop-through, with 75 ohms automatic
terminal function
Y/C output connector
4-pin mini-DIN (1)
Loop-through, with 75 ohms automatic
terminal function
RGB/component connectors
BNC type (3)
Loop-through, with 75 ohms automatic
terminal function
External synchronized output connector
BNC type (1)
Loop-through, with 75 ohms automatic
terminal function
Audio monitor output connectors
Phono jack (2)
Built-in speaker output
1.0 W + 1.0 W (stereo)
78
Specifications
General
Power LMD-2451W: AC 100 V to 240 V, 50/
60 Hz, 1.5 A to 0.7 A
DC 24 V, 5.7 A
LMD-2051W: AC 100 V to 240 V, 50/
60 Hz, 0.8 A to 0.4 A
DC 24 V, 3.3 A
LMD-1751W: AC 100 V to 240 V, 50/
60 Hz, 0.8 A to 0.4 A
DC 12 V, 5.7 A
Power consumption
LMD-2451W: Maximum: approx.
130 W (when two BKM-229X are
installed)
LMD-2051W: Maximum: approx. 95
W (when two BKM-229X are
installed)
LMD-1751W: Maximum: approx.
77 W (when two BKM-229X are
installed)
Peak inrush current
LMD-2451W:
(1) Power ON, current probe method:
23 A (100 V), 56 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
55 A (230 V)
LMD-2051W:
(1) Power ON, current probe method:
16 A (100 V), 34 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
36 A (230 V)
LMD-1751W:
(1) Power ON, current probe method:
17 A (100 V), 26 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
38 A (230 V)
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to + 60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)