Installing To The Rack (Lmd-2051W/1751W) (Using Mb-529/530); Adjusting The Height Of The Stand - Sony LMD-2451W Operating Instructions Manual

Hide thumbs Also See for LMD-2451W:
Table of Contents

Advertisement

Installing to the Rack
(LMD-2051W/1751W)
(using MB-529/530)
You can attach the monitor to the rack by using the
optional mounting bracket.
Monitor
LMD-2051W
LMD-1751W
Preparation (For LMD-2051W only)
Remove the stand attachment bracket (see page 15).
1
Attach the mounting bracket.
For details on attaching the mounting bracket,
refer to the mounting instructions of the mounting
bracket.
2
Attach the unit to the rack with four screws.
Note
The screws are not supplied. Prepare screws according
to the rack.
COM POSI
TE
Y/C
RGB
COM PON
ENT
A-1
A-2
B-1
B-2
HD15
DVI
F1
F2
F3
F4
14
Installing to the Rack (LMD-2051W/1751W) (using MB-529/530) / Adjusting the Height of the Stand
Mounting bracket
MB-529
MB-530
CON
TRO L
+
VOLU ME
+
CON TRAS
T
+
PHAS E
+
CHRO
MA
+
BRIG HT
MEN U
+
ENTE R
RETU RN
Adjusting the Height of
the Stand
LMD-2451W and LMD-2051W come equipped with a
stand. LMD-1751W can be mounted on the optional
SU-561 Monitor Stand.
You can adjust the height of the monitor in three levels
for the LMD-2451W and four levels for the LMD-
2051W and LMD-1751W by changing the position of
the stand attachment bracket and the arm attachment
position. Depending on the height, you can install the
input adaptor with the stand attached to the monitor.
A and B in the following list indicate the screw holes
shown in the illustrations in steps 2 and 4.
Height of the monitor
Position of the
A
stand attachment
bracket
Arm attachment
B
position
3)
LMD-2451W
430.5
(17)
LMD-2051W
376.7
403.0
7
(14
/
)
(15
8
LMD-1751W
359.4
385.7
1
(14
/
)
(15
4
1)
You can install the input adaptor with the stand attached to the
monitor.
2)
Default setting
3)
You cannot attach the stand in combinations of these positions.
For details on mounting the LMD-1751W on SU-561,
refer to the Mounting Instructions of SU-561.
1
Remove the stand attachment bracket (see
page 15).
2
Attach the stand attachment bracket to the A or B
screw holes.
The bracket is attached to the B holes at the factory
(LMD-2451W and LMD-2051W).
Unit: mm (inches)
A
B
B
A
B
A
1)
1), 2)
471.6
497.9
5
5
(18
/
)
(19
/
)
8
8
1), 2)
1)
444.1
470.4
7
1
5
/
)
(17
/
)
(18
/
)
8
2
8
1)
1)
423.8
450.1
1
3
3
/
)
(16
/
)
(17
/
)
4
4
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lmd-2051wLmd-1751w

Table of Contents