Fuel Tank Installation - AeroWorks Extra 300 ARF-QB Assembly Manual

9. Secure the rubber stopper with set screw. Take
care not to strip threads by over tightening set
screw

Fuel Tank Installation

1. Gather the fuel tank parts as shown below. Fuel
tank, fuel tubing, foam rubber, fuel "T", fuel
filler dot, fuel filter and nylon ties.
Note: The fuel "T", fuel filter and filler dot are not
supplied, but are available through
Aeroworks.
2. Install a short piece of fuel line and the fuel "T"
to the fuel pick up tube.
Note: Using a heat gun and or soapy water solu-
tion to soften the fuel line will help with the
installation of the fuel "T".
3. Install the fuel filter, fuel filler line and carbure-
tor fuel line to the fuel tank. Be sure to leave
enough fuel line to reach the engine carburetor
and the filler dot.
Note: It is recommended you always use a fuel
filter in the fuel line to the carburetor.
49