Pilot Communications Trainer Assembly Manual page 21

2-) Overall finished assembly
with servo for references. with servo for references.
4-) While the epoxy is curing,
insert the two parts F51 in the
remaining two slots. Then, push
in completely the Black tube.
3-) Using 30-minute epoxy, slide
into the fuselage part F51A and into the fuselage part F51A and
secure with the Black tube.
5-) Bond the Brass sleeve into
both F51's as shown. Remove
some small material in front of
the first F51 to expose the wood.
-Pilot Trainer- 21