Table of Contents
Advertisement
NTI NODEMUX MULTI-USER UNIVERSAL KVM SWITCH
SerTest- RS232 Interface Test Program
This software allows a user to test the functions of an NTI server switch, matrix switch or Multi-user/Multi-platform switch RS232
interface.
The program SerTest along with the Matrix Switcher's Control Program is installed from the CD packaged with this
switch. SerTest generates a main menu with the selections described below:
Main Options
•
Matrix Operations
•
Ethernet Operations
•
Setup Options
•
About SerTest
Matrix Operations
Key
Selection
1)
Connect Output/User to an Input/CPU
2)
Connect All Outputs/Users to an Input/CPU
3)
Connect Audio Output/User to an Input/CPU
4)
Connect All Audio Outputs/Users to an Input
5)
Change Mute Status for Audio Output/User (not
applicable to this unit)
6)
Change Volume for Audio Output/User (not
applicable to this unit)
7)
Read Connection for Video Output/User
8)
Read Connection for Audio Output/User
9)
Read Mute and Volume for Audio Output/User
a)
Save I/O Connections into Unit Memory
b)
Restore I/O Connections from Unit Memory
c)
Change All Units Baud Rate (9600/COM1:)
d)
Reset Unit
e)
Reset All Units
f)
Read Unit Size
g)
Read Unit Version/Revision String
h)
Save All Units I/O Connections into Units
Memory
i)
Restore All Units I/O Connections from Units
Memory
Selections in the "Key" column that are gray are not applicable to this product.
- send commands to the matrix unit.
- set Ethernet connection variables (not applicable to this product)
- set COM port, baud rate, and unit address
- display the program version
- connect an output to an input
- connect all outputs to an input
- connect an output to an input (audio ports only)
- connect all outputs to an input (audio ports only)
- mute or un-mute the Audio port output
- change Audio port output volume
-read the connection of a specific video output
-read the connection of a specific audio output
- read the volume and the mute status of the specified output (audio
-save the connections into switch memory bank
-restore the connections from switch memory bank
-change RS-232 Baud rate of all switches
-the current baud rate and serial port are displayed in parentheses
- send a reset command to the switch
- the current unit address is displayed in parentheses
- send an internal reset command to all switches
- read the switch size (number of inputs and outputs)
-read a string containing the switch version, type, and size
-save the connections into switch memory bank, command for all
-restore the connections from switch memory bank, command for all
Description
ports only)
switches
switches
24
Advertisement
Table of Contents
