Select The User; Carrying Out A Measurement; Before The Measurement - Microlife BP 3BM1-3P Instruction Manual

5. Please follow the instructions above to set the day, hour and minutes.
6. After all settings have been made, click the «Time» button once.
The date is briefly displayed and then the time. The input is now
confirmed and the clock begins to run.
Note:
• If you want to change date and time, press and hold the time button down for approx.
3 seconds till Year flashes, then you can enter the new values as described above.
• 1 x press on «Memory» button or «Time» button advances one operation.
• Holding the button down speeds up the procedure.

4.5. Select the User

This blood pressure monitor is designed to store 30 measurements for each of two users. Before taking a
measurement, be certain that the correct user has been selected.
a) With the unit off, press and hold the «Time» button for 3 seconds until the user
icon in the lower left corner of the LCD screen flashes.
b) Press the «Memory» button to toggle between users.
c) Press the «O/I» button to make your selection.
5.

Carrying out a measurement

5.1. Before the measurement

• Avoid eating, smoking as well as all forms of exertion directly before measurement. All these factors
influence measurement result. Try to find time to relax by sitting in an armchair in a quiet atmosphere
for about ten minutes before measurement.
• Remove any garment that fits closely to your upper arm.
• Always measure on the same arm (normally left).
• Take measurements regularly at the same time of day, since blood-pressure changes during the course
of the day.
08-15
1 2
21