Front Bumper (Outlander Xt Models) - Can-Am 2008 Outlander 400 EFI Shop Manual

PARTS TO BE INSTALLED
vbl2008-005-103
WRONG WAY OF SECURING THE POSITIVE (+) POST
2. Ensure that the cables is routed as per the fol-
lowing illustrations.
vbl2008-005-100
OUTLANDER 400
vbl2008-005-100_a
OUTLANDER 500-650-800R
6 / 34
sales@midwestmanuals.com
vbl2007-008-888_a
RENEGADE 500-800R
Front Bumper
Outlander XT Models
1. Install upper part of the bumper with:
– 2x M8 x 20 bolts
– 2x M8 flat washers
– 2x M8 nuts
vbl2008-007-005_a
1. Upper retaining bolts
2. Do not torque upper retaining M8 nuts yet.
3. Install lower part of the bumper with :
– 4x M8 x 40 screws
2009-2
sales@midwestmanuals.com
PREDELIVERY