Table of Contents
Advertisement
MPI-1 Supply
The MPI can use the vehicle power for its supply.
Four AA batteries or an AC/DC power supply can
also be used. Make sure to respect MPI specifica-
tion if a power supply is used.
Connections with Vehicle Using
MPI-1
WARNING
If the computer you are using is connected to
the power outlet, there is a potential risk of
electrocution when working in contact with
water. Be careful not to touch water while
working with the computer.
1. Remove service compartment cover and lo-
cate communication connector.
2. Unplug communication connector.
vmr2007-042-001_a
TYPICAL
3. Connect the 6-pin adapter to the vehicle con-
nector.
2 / 7
sales@midwestmanuals.com
vmr2007-042-002
TYPICAL
4. Connect the diagnostic cable to the 6-pin
adapter.
vdd2006-001-105
5. Connect the other diagnostic cable connector
to MPI connector.
6. Connect serial cable to MPI connector.
vdd2006-001-102
7. Connect remaining serial cable connector to
the serial port of a PC (personal computer).
2009-2
sales@midwestmanuals.com
SERVICE
Advertisement
Table of Contents
Troubleshooting
