Table of Contents
Advertisement
vbl2008-007-006_a
1. Lower retaining screws
4. Secure upper retaining nuts to 11 N•m
(97 lbf•in).
5. Secure lower retaining screws to 25 N•m
(18 lbf•ft).
Mirrors
Outlander CE Models
1. Remove mirrors from the storage compart-
ment.
2. Install mirrors on their supports.
Winch Switch
Outlander XT and LTD Models
1. Remove winch switch from vehicle by cutting
retaining locking tie.
2. Remove bolt from brake housing.
vbl2008-007-007_a
1. Winch switch
2. Brake housing bolt
3. Secure winch switch to the brake housing with
the existing bolt.
PREDELIVERY
sales@midwestmanuals.com
vdd2006-001-017
OUTLANDER XT AND LTD
vbl2009-002-102
OUTLANDER XT AND LTD (CE)
4. Attach wires to handlebar, using a locking tie.
vbl2008-005-101_a
Flag Holder
Renegade CE Models
1. Position flag holder on vehicle rear support.
2. Install retaining bolt.
3. Tighten retaining nut.
2009-2
sales@midwestmanuals.com
PARTS TO BE INSTALLED
7 / 34
Advertisement
Table of Contents
Troubleshooting
