Hot Water - REMEHA Avanta Plus 35c Installation And Service Manual

LTNLPER000017a
LT.NL.PER.000.017 + LT.NL.PER.000.018
LTNLPER000019a
LT.NL.PER.000.019 + LT.NL.PER.000.020
1,5 ... 2 bar
•
Hold a cloth against the bleed nipple, open the nipple
with a bleed key and allow air to escape slowly.
LTNLPER000018a
•
Wait until water comes out of the bleed valve (without
spluttering) and then close the bleed nipple.
LTNLPER000020a
 Hot water
The water may still be hot.
•
After bleeding, check whether the water pressure in the
central heating system is still adequate; if not, top up.
See par.5.1.
LTALW7H000211a
LT.AL.W7H.000.211
•
Plug the boiler back in. The boiler starts up automatically.
230 V
The boiler will now run through a bleed cycle for approx.
2 minutes, after which normal operation will start. See
par. 3.2 for an explanation of the codes on the display.
LT.AL.W7H.000.226
LTALW7H000226a
18
Remeha Avanta Plus