Panasonic WJ-HD309 Operating Instructions Manual page 9

When the shift button is lit, these buttons work as the
toggled function buttons.
(The buttons available as the toggled function buttons
will light green when the shift button is lit.)
!1 Pan, Tilt, Latest Recorded Image Playback Button
(PAN/TILT, GO TO LAST)
Pans/tilts a selected camera, or plays back the latest
recorded image.
(Refer to page 41 and 23 respectively.)
!2 Zoom, Focus, A - B Repeat Button (ZOOM/FOCUS,
A-B REPEAT)
Zooms in/out, adjusts focus, or repeats playback of
recorded images between two designated points.
(Refer to page 41 and 24 respectively.)
!3 Iris, Listing Button (IRIS, LISTED)
Adjusts iris, or enables/disables the filtering playback.
(Refer to page 42 and 28 respectively.)
!4 Preset, Auto Pan Button (PRESET/AUTO)
Moves a camera to the preset position, or activates the
auto pan operation.
(Refer to page 42 and 44 respectively.)
!5 Stop Button (STOP)
Stops playback.
!6 Play/Pause Button (PLAY/PAUSE)
Plays recorded images, or pauses playback.
!7 Record Button (REC/REC STOP)
Starts recording. To stop recording, press this button
down for 2 seconds or more.
!8 Slow Button (SLOW)
Pans/tilts a selected camera slowly.
!9 Search Button (SEARCH)
Displays the searching menu.
@0 Setup, Escape Button (SETUP/ESC)
Displays the setup menu, or cancels operation on the
setup menus, etc.
@1 Busy Indicator (BUSY)
Lights when a selected camera is not available to oper-
ate because another user is operating it using a con-
troller or a PC via a network. In this case, wait until this
indicator goes off.
@2 Arrow Buttons (CDAB)
Adjusts zooming/focus, or moves the cursor on the
setup menus and the searching menu.
@3 Set Button (SET)
Works differently depending on the situations listed
below:
• Plays recorded images at the current playback speed
when this button is pressed during fast playback.
• Registers preset positions of cameras.
• Activates the auto focus function.
• Sets the alarm suspension mode on/off.
• Determines the setting of parameters on the setup
menus.
@4 Jog Dial
Works differently depending on the situations as fol-
lows:
• Plays recorded images frame by frame when this dial is
rotated during pausing playback.
• Skips playback time when this dial is rotated during
playback at normal speed.
• Moves the cursor on the searching menu or the thumb-
nail menu.
• Selects a parameter setting or a character on the setup
menus.
@5 Shuttle Ring
Works differently depending on the situations as fol-
lows:
• Plays fast when this dial is rotated during playback at
normal speed.
• Turns the searching menu pages or the thumbnail
menu pages.
@6 Connectors Cover
@7 Copy Port (COPY2)
Connect a recommended DVD-RAM drive, CD-R drive
or DVD-R drive with this port.
@8 S-Video Output Connector (S-VIDEO)
Connect the S-video input connector of a VCR with this
connector. The same video signal supplied to the MON-
ITOR OUT2 connector on the rear panel will be sup-
plied to this connector.
@9 Video Output Connector (VIDEO OUT)
Connect the video input connector of a VCR with this
connector. The same video signal supplied to the MON-
ITOR OUT2 connector on the rear panel will be sup-
plied to this connector.
#0 Audio Output Connector (AUDIO OUT)
This connector, for an RCA standard jack, supplies an
unbalanced –10 dBV, 600 Ω line output audio signal to
an external device.
Recorded audio will be supplied from this connector
during playback.
The same audio signal supplied to the AUDIO OUT
connector on the rear panel will be supplied to this con-
nector.
9