Panasonic WJ-HD309 Operating Instructions Manual page 121

u
[Host Edit] Correction of registered host infor-
mation
It is possible to edit registered host information.
Move the cursor to "Host IP Address" and rotate the jog
dial to select the host IP address.
Registered information will be displayed.
Editing can be performed in the same way as registra-
tion. (Refer to page 120.)
Move the cursor to "EDIT" at the lower right on the menu
and press the SET button to complete editing.
SETUP MENU
Maintenance Recording
Switcher Display
I
Host IP Address
Basic Setup
I
Level
Time & Date
I
Priority
I
User Regist.
Default Display
I
Camera Partitioning
User Edit
CAM1
User Delete
CAM2
Host Regist.
CAM3
CAM4
Host Edit
CAM5
Host Delete
CAM6
User Level CAM7
CAM8
Save/Load
i
[Host Delete] Deletion of registered host
It is possible to delete a registered host.
Move the cursor to "Host Delete" and rotate the jog dial
to select the host. Move the cursor to "DELETE" and
press the SET button.
The selected host will be deleted.
SETUP MENU
Maintenance Recording
Switcher Display
I
Host IP Address
Basic Setup
Time & Date Setup
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
o
[User Level] Setting of operation level
Set operable functions at each user level (LV 1/LV 2/
LV 3).
Rotate the jog dial to display "b" to enable operation.
Leave it blank to disable operation.
Refer to the table below for each function.
SETUP MENU
Maintenance Recording
Switcher Display
Basic Setup
Time & Date WJ-HD300 Setup
WJ-HD300 Setup Status
User Regist.
Camera Setup
User Edit
Event Log Status
Access Log Status
User Delete
Error Log Status
Host Regist.
Alarm Reset
Alarm Suspend
Host Edit
Copy
Host Delete
Normal Recording Erase
Event Recording Erase
User Level
Manual REC Operation
Save/Load
Playback Operation
N/W Access
Event Schedule
LIVE
Comm System
000 . 000 000 000 . .
LV1
16
16 SCREEN
View/Operate CAM9 View
View/Operate CAM10 View
View/Operate CAM11 View
View/Operate CAM12 --
View/Operate CAM13 --
View/Operate CAM14 --
View/Operate CAM15 --
View/Operate CAM16 --
SET
Event Schedule
LIVE
Comm System
0. 0. 0. 0
DELETE
Event SChedule
LIVE
Comm System
LV1 LV2 LV3
121