Panasonic WJ-HD309 Operating Instructions Manual page 105

[Screenshot 4]
The checkbox for "New Time Table Setup" is checked.
SETUP MENU
Maintenance Recording
Time Table (MON)
Switcher Display
Copy the Other Time Table
New Time Table Setup
Time Table
Period 1 12
REC Prog
Period 2 08
Event Prog
Period 3
12
Special Days
Period 4
01
Period 5 05
Period 6 09
REC: P1 P2
v Move the cursor to the start time input box for "Period 1"
using the arrows button.
b Rotate the jog dial to set the start time.
The end time can be set in the same way.
Repeat steps 4 and 5 to set for "Period 2" - "Period 6".
(It is not necessary to set for all of "Period 1" - "Period
6".)
n Select OK using the arrows button and press the SET
button.
Notes:
• Start time and end time can be set in 15 minutes
intervals.
• To copy a timetable that is set for a different day of
the week, select "Copy the Other Time Table" and
select a day of the week by rotating the jog dial in
step 3.
Then, move the cursor to select OK and press the
SET button.
• When the SET button is pressed after moving the
cursor to CANCEL in step 6, the settings will be
canceled and the selected timetable window will be
closed.
• Until the SET button is pressed after moving the
cursor to CANCEL in step 6, the settings will not be
applied to the selected timetable.
[Screenshot 5]
The settings are applied to the selected timetable and the
timetable for all the days of the week will be displayed.
SETUP MENU
Maintenance Recording
12AM
Switcher Display
MON REC
EVT
Time Table REC
TUE
EVT
REC Prog
REC
WED
EVT
Event Prog
REC
THU
EVT
Special Days
REC
FRI
EVT
REC
SAT
EVT
REC
SUN
EVT
REC
DAILY
EVT
REC
EXT
EVT
REC:
P1 P2
m Move the cursor to the time zone of the day of the week
to which the REC Prog is to be assigned using the
arrows button.
Event Schedule
LIVE
Comm System
TUE
: 00 AM 08 : 00 AM
: 00 AM
12 : 00 PM
: 00 PM 01 : 00 PM
: 00 PM 05 : 00 PM
: 00 PM 09 : 00 PM
: 00 PM
12 : 00 AM
O K CANCEL
P3 P4 EVT: P1 P2 P3 P4
Event Schedule
LIVE
6AM 12PM 6PM 12AM
Comm System
OK CANCEL
EVT:
P3 P4 P1 P2 P3 P4
, Rotate the jog dial to select a desired REC Prog/Event
Prog.
(Rotating the jog dial changes the displayed REC
Prog.)
REC Prog will be displayed with different colors.
Orange: REC Prog 1/Event Prog 1
Yellow: REC Prog 2/Event Prog 2
Pale purple: REC Prog 3/Event Prog 3
Indigo blue: REC Prog 4/Event Prog 4
Repeat steps 7 and 8 to assign REC Prog to other
timetables.
. Move the cursor to OK using the arrows button and
press the SET button.
→ The REC Prog/Event Prog will be assigned to the
selected time zone and the selected timetable win-
dow will be closed.
Notes:
• When the SET button is pressed after moving the
cursor to CANCEL in step 9, the settings will be
canceled and the selected timetable window will be
closed.
• Until the SET button is pressed after moving the
cursor to CANCEL in step 9, the programs will not
be assigned to the selected timetable.
r
[Special Days] Perform the settings for record-
ing programs for special days
Assign timetables to special days aside from other days
of the week. Timetables for special days can be set for
up to 30 days.
Perform the settings to specify dates as special days
and apply the recording schedule to the special days.
SETUP MENU
Maintenance Recording
Switcher Display
Time Table
DATE
1 1 M 1
REC Prog
2 -- M --
Event Prog
3 -- M --
4 -- M --
Special Days
5 -- M --
6 -- M --
7 -- M --
8 -- M --
9 -- M --
10 -- M --
11 -- M --
12 -- M --
13 -- M --
14 -- M --
15 -- M --
Event Schedule
LIVE
Comm System
MODE DATE MODE
D SUN 16 -- M -- D --
D -- 17 -- M -- D --
D -- 18 -- M -- D --
D -- 19 -- M -- D --
D -- 20 -- M -- D --
D -- 21 -- M -- D --
D -- 22 -- M -- D --
D -- 23 -- M -- D --
D -- 24 -- M -- D --
D -- 25 -- M -- D --
D -- 26 -- M -- D --
D -- 27 -- M -- D --
D -- 28 -- M -- D --
D -- 29 -- M -- D --
D -- 30 -- M -- D --
105