Panasonic WJ-HD309 Operating Instructions Manual page 82

G Connection for the Auto Adjust Time function
• When "Auto Adjust Time" of "System" on the SETUP MENU is set to "MASTER"
"Time Adjust Output" becomes available and the clock of this unit can be applied to other units.
• When "Auto Adjust Time" of "System"on the SETUP MENU is set to "SLAVE"
"Time Adjust Input" becomes available. When a signal output from other equipment is supplied to the time adjust I/O terminals
between 00 minutes 00 seconds and 14 minutes 59 seconds every hour or between 45 minutes 00 seconds and 59 minutes
59 seconds every hour, the clock will be set to "00 minutes 00 seconds" of the closest hour .
Example:
Signal is supplied at 2:50:00 (hour:minute:second)pm → Set at 3:00:00 pmM
Signal input supplied at 3:14:45 pm → Set at 3:00:00 pm
Signal is supplied at 3:20:00 pm → Time will not be adjusted.
82
(Earth)
(Time adjust output)
!3 @0
ALARM/CONTOROL
(Earth)
(Time adjust output)
!3 @0
ALARM/CONTOROL
Terminal block of other units
Front LED
monitor
output
Terminal block of other units
Front LED
monitor
output