Panasonic WJ-HD309 Operating Instructions Manual page 108

w
[Monitor 2] Switcher function of monitor 2
Perform the settings for the switcher function of monitor
2.
SETUP MENU
Monitor 1
Monitor 2
G Live Sequence
The settings for "Live Sequence" are the same as for
"Monitor1". Refer to page 106 for further information.
G Sequence Timing
The settings for "Sequence Timing" are the same as for
"Monitor1". Refer to page 107 for further information.
• "EXT" is selectable only when an external device that
can transmit a sequence signal is connected.
• The sequence changeover I/O on the rear panel will
supply signals when "INT" is selected and will receive
signals when "EXT" is selected.
G Auto Skip
The settings for "Auto Skip" are the same as for "Monitor1".
Refer to page 107 for further information.
G Login Screen
The settings for "Login Screen" are the same as for
"Monitor1". Refer to page 107 for further information.
108
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
I
Live Sequence
SETUP
I
Sequence Timing
INT
I
Auto Skip
OFF
I
Login Screen
CAM1
I
Secret View
OFF