Defining The Default Server Name - Sun Microsystems sun fire V20Z Installation Manual

Defining the Default Server Name

This procedure is optional, but you can follow these steps to define a name for the
SP that can be displayed in the LCD panel when the server is in a background state.
When the server is in a background state, the top line of the LCD panel displays the
SP IP address, as in the following example:
123.45.67.89
OS running
1. When the server is in background state, press any operator panel button (see
).
FIGURE 2-1
After you press a button, the LCD panel displays the first menu option:
Menu:
Server Menu
2. Press the Forward button until you reach the Panel menu:
Menu:
Panel menu
3. Press the Select button to display the Panel menu options.
4. Press the Forward button until the Name for LCD menu option displays:
Panel Menu:
Name for LCD?
5. Press the Select button to enable data entry.
6. Enter an alphanumeric string to display on the first line of the LCD.
You can enter letters A through Z, digits 0 through 9, hyphen, and space.
a. Use the Forward and Reverse buttons to locate the character you wish to enter
in each field.
b. Press the Select button combination when you locate the character you want.
c. Repeat this process until the entire name is complete.
7. Use the Enter button combination (Forward plus Select) to save your entry.
Chapter 2 Initial Software Configuration 15