System Options (Address 2423); Emergency Free Access (Address 4080) - NAPCO x255 Programming Instructions Manual

WI1092E 10/05
SYSTEM OPTION:
1. Select the System Option from the table shown and enter in the corresponding address location at right. Keypad Blank-
ing will clear all data from the LCD display (and turn off all keypad LED's) after the system is armed and delay time has ex-
pired. The display will re-appear when an exit/entry door is faulted, causing an entry time delay display, or if a valid user code
is entered at the keypad while the system is armed.
U D
2. Press or to save. NOTE: Dark shaded data value box shows option not available.
EMER GEN CY FREE AC CESS (AD DRESS 40 8 0)
ENABLE ACM OPTION:
1. Select the Emergency Free Access
Zone Number (1-255) and enter corre-
sponding address location at right.
2. Press
L
NAPCO Security Systems
SYST EM OPTION S (ADDRES S 2423)
ADDRESS 2423
SYSTEM OPTIONS
DATA ENTRIES
RIGHT
1
2
3 Enable TCP/IP Communications
4 TCP/IP Panel/Site Initiated Functions
5
6
7
8
U D
or to save.
OPTION
Enable ACM Access
RESERVED
RESERVED
RESERVED
RESERVED
Enable Keypad Blanking
ADDRESS 4080
Emergency
Free Access
Zone Number
[Default = 000]
X
GEM-X255 Programming Instructions
Page 45