Product Disposal; Replacement Of Winbot's Battery And Disposal Of Used Batteries; Cases Of Product Problems; Preparation Before Use - ECOVACS WINBOT Instruction Manual

Robotic window cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 70

2.6 Product Disposal

2.7 Replacement of Winbot's Battery and Disposal of Used Batteries

2.8 Cases of Product Problems

• Should there be a problem with your unit, please consult the questions and answers at the
end of the Instruction Manual. Should you not find the necessary help in the Question and
Answer section, please call our service number for futher technical assistance.
• Please contact our after-sales service department or the professional maintenance agency
developed by our company so that the professional maintenance personnel can provide after-
sales service and maintenance.

3. PREPARATION BEFORE USE

3.1 Charging Winbot's Backup Battery

ENG - 80
• As soon as the unit is unpacked and you have verified that all
components have been accounted for, you should dispose of
the packaging material right away to keep the children from
playing with it.
• Please recycle all packing material.
• Replace the Lithium battery with only genuine ECOVACS
replacement battery. By calling our service number and with
the Model number and the numbers from the UPC label on
the bottom ofthe unit, you can order a replacement Lithium battery.
• Should the Lithium battery need replaced, dispose ofthe old battery
in accordance with your local laws.
• Before charging, please firstly turn on the
bottom of the Winbot. (0 OFF 1 ON. The default state is "0")
Otherwise, Winbot can NOT iff be charged or working.
• After plugging the adapter into your receptacle connect the supply
cord to the Winbot so the Back Up battery can be fully charged.
The Battery MUST be fully charged before the unit will work
when placed on the Winbot.
WARNING: Please make sure that the oord of the unit and adapter
are not within reach of a child so that they can pull the unit down
upon themselves and cause injury.
• Move the switch on the handle to the furthest right position "
The Indicator Light will flash Green indicating that the Back Up
battery needs to be charged. When the Back Up battery is fully
charged, the Indicator Light will light a continuous Green.
• Charging time for the battery is approximately 2 hours. This time
will vary depending on the temperature of the room, a cooler or
warmer room may také longer to charge the battery.
NOTE: While the unit is cleaning the window,make sure the Switch
on the Handle is in the ON (center position) and the unit is connected
to the adapter and the adapter is plugged into your receptacle.
button at the
".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents