Internet - Connections - NetComm NB6PLUS4WN User Manual

Internet – Connections
To set WAN settings for each service, please open Advanced – Internet. This page allows you to edit, to
remove, or to add WAN settings.
If you click the Connect hyperlink under the PVC Name item, the system will connect to WAN automatically. If
the WAN connection is OK, you can check the detailed information directly.
You can add new PVC(s) by clicking the Add button, edit the settings for the present PVC by clicking
the Edit column, or delete the existing PVC by pressing
Adding a New One
To add a new WAN connection, please click the Add button. The following screen appears.
vPI (virtual Path Identifier):
Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255.
Please refer to the value that your ISP provides.
vCI (virtual Channel Identifier):
Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to
31 is reserved for well-known protocols). Please refer to the value that your ISP provides.
YML854 Rev1
www.netcomm.com.au
icon.
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
in
1