Chapter 2: System Requirement And Installation; System Requirement - NetComm NB6PLUS4WN User Manual

CHAPTER 2: SYSTEm REqUIREmENT AND
System Requirements
Before continuing with the installation of your Router please confirm that you comply with the minimum
system requirements.
• Pentium MMX 233MHz
®
• A CD-ROM Drive
• Ethernet card installed with TCP/IP Protocol
(required when connecting to the ETHERNET port of your ADSL Router)
• OS independent for Ethernet
• USB Port
(required only if you are connecting to the USB Port of your ADSL Router, not applicable for NB6Plus4 or NB6Plus4Wn)
• Host Operating Systems support for USB:
• Windows
®
• Windows
®
• Windows
®
• Windows
®
• Windows
®
• Web Browser support:
• Microsoft Internet Explorer 5.0 (or later versions)
• Netscape
®
• Most popular browsers
To access the ADSL Router via Ethernet (Recommended), the host computer must meet the following
requirements:
• Equipped with an Ethernet network interface.
• Have TCP/IP installed.
• Allow the client PC to obtain an IP address automatically or set a fixed IP address.
• With a web browser installed: Internet Explorer 5.x or later.
The ADSL Router is configured with the default IP address of 192.168.1.1 and subnet mask of
255.255.255.0. Considering that the DHCP server is Enable by default, the DHCP clients should be able to
access the ADSL Router, or the host PC should be assigned an IP address first for initial configuration.
You also can manage the ADSL Router through a web browser-based manager: ADSL ROUTER CONTROL
PANEL. The ADSL Router manager uses the HTTP protocol via a web browser to allow you to set up and
manage the device.
To configure the device via web browser, at least one properly-configured PC must be connected to the network (either connected
directly or through an external hub/switch to the LAN port of the device).
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide
0
INSTALLATION
98 Second Edition
2000
ME
XP
Vista (recommended)
Navigator 4.0 (or later versions)
YML854Rev1
www.netcomm.com.au