Input Enablement Device - Xerox 4635 Installation Planning Manual

LPS OPTIONS

Input enablement device

7X10 enablement kit
Bar code device
2-4
Figure 2-2. 4635 LPS with optional bypass transport and
input enablement device
1 Bypass transport paper output location
2 Input enablement device paper input location
Adding feeders to your 4635 LPS is made possible by the input
enablement device option. Located on the right side of the
feeder/stacker, it allows your 4635 LPS to support and interface
directly with feeders. Figure 2-2 points to the location of the
input enablement device.
The 7 X 10 input enablement kit allows your 4635 to print on 7 X
10 inch paper size.
The bar code feature allows processing of bar code data streams
with the ability to cross-check the system UI, the controller and
the printer. This cross-checking ensures that any bar code sheets
printed have been accounted for by each component of the
system.
Figure 2-3 shows the 4635 LPS with the optional bar code
device.
Figure 2-3. 4635 LPS with optional bar code device
XEROX 4635 LASER PRINTING SYSTEM INSTALLATION PLANNING GUIDE