Installing The Vacuum Bag - Yardworks 060-3893-2 Instruction Manual

10
model 060-3893-2 | contact us: 1.866.523.5218

Installing the Vacuum Bag

1. Align the bumps on the vacuum elbow tube with the slots on the
blower outlet (Fig. 8). The flared end of the vacuum elbow tube
should point to the right.
2. Insert the vacuum elbow tube into the blower outlet (Fig. 8).
3. Twist the vacuum elbow tube clockwise until it locks into place
(Fig. 8).
4. Insert the flared end of the vacuum elbow tube approximately 4"
(10 cm) into the vacuum bag (Fig. 9).
5. Pull the cinch strap to tighten the vacuum bag around the
vacuum elbow tube.
NOTE: The cinch strap should be tight enough to prevent the
vacuum elbow tube from slipping out of the vacuum bag, but
loose enough for the vacuum bag to have limited movement
along the vacuum elbow tube.
Upper
Vacuum Tube
Blower Outlet
Vacuum
Elbow Tube
Cinch Strap
Vacuum
Elbow Tube
Cinch Buckle
Dots
Lower
Arrows
Vacuum Tube
Fig. 7
Slots
Bumps
Fig. 8
Vacuum Bag
4" (10 cm)
Fig. 9