Attaching And Removing The Snap-On Bag; Installing The Shoulder Harness - Yardworks 60-3856-2 Owner's Manual

ATTACHING AND REMOVING THE SNAP-ON BAG

Attaching the Snap-on Bag
1.
Attach the vacuum bag to the snap-on bag hook on the
Blower/Vac tube (Fig. 3).
2. Slide the snap-on bag tube over the debris exhaust tube
on the housing. Push the tube until the latching tabs on
both sides click into place, securing the bag to the
Blower/Vac (Fig. 4).
Latching Tabs
Removing the Snap-on Bag
1.
Press the latching tabs on both sides of the bag tube,
and pull the bag down away from the Blower/Vac (Fig. 5).
2.
Detach the vacuum bag from the vacuum bag hook.
Vac
PRESS IN
ASSEMBLY INSTRUCTIONS
Snap-on Bag Hook
Fig. 3
vac
blow
Debris Exhaust Tube
Snap-on Bag Tube
Snap-on Bag
Fig. 4
Latching Tabs
Blow
PRESS IN
Fig. 5

INSTALLING THE SHOULDER HARNESS

1. Push the strap through the centre of the buckle.
2.
Pull the strap over the crossbar and down through the
slot in the buckle (Fig. 6).
3. Snap the clip onto the support fitting (Fig. 7).
Clip
While standing in the operating position, adjust the
4.
length of the strap to fit the size of the operator. Pull the
tab in order to lengthen the strap. Pull the strap in order
to shorten it (Fig. 8).
9
Clip
Fig. 6
Support Fitting
Fig. 7
Fig. 8