Assembling The Unit As A Vacuum; Removing The Upper Blower Tube; Removing The Lower Blower Tube; Installing The Upper Vacuum Tube - Yardworks 060-3893-2 Instruction Manual

model 060-3893-2 | contact us: 1.866.523.5218

ASSEMBLING THE UNIT AS A VACUUM

Removing the Upper Blower Tube

1. Insert a flat-head screwdriver into the tube lock. Turn the
screwdriver counterclockwise 1/4 turn and hold it in place (Fig. 3).
2. Twist the upper blower tube counterclockwise until it unlocks
from the blower outlet (Fig. 3).
3. Remove the upper blower tube from the blower outlet.

Removing the Lower Blower Tube

1. While holding the upper blower tube, twist the lower blower tube
counterclockwise until it unlocks from the upper blower tube.
2. Remove the lower blower tube from the upper blower tube.

Installing the Upper Vacuum Tube

1. Insert a flat-head screwdriver into the hole in the impeller door
and press the impeller door lock tab inward (Fig. 4). Open the
impeller door.
2. While holding the impeller door open, align the slots on the
upper vacuum tube with the tabs in the impeller intake (Fig. 5).
3. Insert the upper vacuum tube into the impeller intake (Fig. 6).
4. Twist the upper vacuum tube clockwise with both hands until it
locks into place (Fig. 6).
Installing the Lower Vacuum Tube
1. Align the arrow on the lower vacuum tube with the arrow on the
upper vacuum tube (Fig. 7).
2. Insert the lower vacuum tube into the upper vacuum tube (Fig. 7).
3. Twist the lower vacuum tube clockwise with both hands until it
locks into place (Fig. 7).
NOTE: When properly assembled, the dot on the lower vacuum
tube should align with the dot on the upper vacuum tube (Fig. 7).
Tube Lock
Fig. 3
Impeller
Door
Fig. 4
Tabs
Fig. 5
Upper
Vacuum Tube
Fig. 6
9
Impeller Door
Lock Tab
Impeller Intake
Impeller Intake