To Place A Call On Hold; To Place A Call On Exclusive Hold - NEC UNIVERGE SV7000 User Manual

To Place a Call on Hold

Press Hold. Held line flashes.
Note: If held line appears on other D
red slowly.
To retrieve
Lift handset or press Speaker.
Press held line. Use handset to converse.
Note: Any station with this line appearance can retrieve the call.
If unanswered
After preprogrammed time, Automatic Recall is initiated.
Visual and audible signal (rapid flash and ring burst) is sent to station that placed call on hold.
Note: Hold shows as a flashing green LED on your phone. The same line on other phones shows as a flashing red LED.
Recall shows as a flashing green LED on your phone and flashing red LED on other phones with the same line.

To Place a Call on Exclusive Hold

Press Hold twice. Line appearance indicates interrupted wink.
Note: If held line appears on other D
LED remains steadily lit red.
To retrieve
Lift handset or press Speaker.
Press held line. Use handset to converse.
term
Note: Only the D
term
stations, the associated LED flashes
term
stations,
that set Exclusive Hold option can retrieve the call.
– 42 –
Held station
number
HOLD
4:26 PM TUE 13 APR 2004
Held station
number
E_HOLD
4:26 PM TUE 13 APR 2004
2001
2001