NEC UNIVERGE SV7000 User Manual page 36

To Logout
Press the preassigned logout button on the terminal.
Note 1: This location is an example.
Note 2: Logout button is assigned by data setting at the ECP (Enter-
prise Communication Platform).
"LOGOUT?" is displayed on the LCD of the terminal.
Press the logout button on the terminal again.
Note: The following pages describe how to use the ECP (Enterprise Communication Platform) Features with the D
For detailed information pertaining to the D
UNIVERGE SV7000 Data Programming Guide.
term
IP only, please refer to feature [I-43] IP Enabled D
– 32 –
term
IP.
term
in the