NEC UNIVERGE SV7000 User Manual page 25

Soft Key Features
When the Soft Key corresponding to a desired function name is operated, the selected function name starts to blink
on the LCD. The blinking display of available functions takes precedence over the display of functions specified by
the Soft Key pattern. (Note)
FDB (Call Forwarding – Busy Line)
Permits a call to a busy station to be immediately forwarded to a predesignated station.
FDA (Call Forwarding – All Calls)
Permits all calls destinated for a particular station to be routed to another station regardless of the busy or idle status
of the called station.
FDL (Logged Out IP Station – Call Destination)
term
Enables a system to transfer the call to appropriate station when D whose LOGGED OUT IP STATION – CALL
DESTINATION has already been registered is in logout status.
E-OVR (Executive Override)
Enables selected station users, upon encountering a busy condition at an internal station, to bridge into the busy
connection.
CW (Call Waiting)
Enables a busy station to receive a second incoming call. A camp-on indication tone is sent to the busy station, and
the user can use a switchhook flash to answer the second call.
CB (Call Back)
Provides the ability for a calling station to set a CALL BACK. The calling station will be rung as soon as the busy sta-
tion becomes available.
S&R (Save and Repeat)
Allows a station to save a specific dialed number and then redial that number later.
MWSET (Message Waiting – Set)
Allows a station to set a Message Waiting indication or lamp.
HOLD (Call Hold)
Permits a station user to hold a call in progress and to return to the previously held call.
MWOFF (Message Waiting – Cancel)
Allows a station to cancel a Message Waiting indication or lamp.
– 21 –